TSAUTOP 1.8*1*2.2m Hydrographic Film Drying Oven Machine
(offer water transfer printing service)
We are making these with 4" high-density mineral wool panels surrounded with 20ga galvanized steel to provide the best insulation possible with 3.15" walls (this is not household insulation often used in lower-quality ovens). This model oven is powered by 220v, 60A single phase power, and the control box will need its own 110v power circuit. It has three 4000-watt 48" u-bend industrial heating elements made to aid in the circulation of heat providing more consistent temperatures throughout the oven. Our industrial oven elements will also have a longer life than ovens using elements from a household oven. All of our ovens have a 14ga galvanized floor to provide a smooth transition when using a rolling rack in your oven.
Our oven control box is designed to make it easier for the end user by using the auto-tuning feature. With this feature, all you have to do is hook up the power and turn the oven on and it will automatically set up the PID controller to provide the fastest warm-up times while keeping the temperature closer to your setting. We also use solid-state relays in all of our control boxes to eliminate moving parts that may fail, while also keeping noise down from the operation of larger contact blocks.
(1)Automatic thermostat
(2)Temperature range: Room-150ºC
(3)Main power: AC380V
(4)Heating power:12kw
(5)Wall thickness:80mm
(6)outside1.2mm cold rolling plate, inside 1.2mm Galvanized sheet
(7)The circulation system uses a motor to drive the wind impeller
TSAUTOP is a leading hydro dip solution supplier in China and provides kinds of hydro dip film and hydro dipping equipment. And we always provide hydro dipping training about our machines offline and online.
TSAUTOP hydrographic provides hydro-dipping drying equipment for dipped items' drying quickly, you will go through two steps drying out during the whole hydro-dipping process, especially for metal material such as car rims, the high temperature drying out can make the dipping effect better than not. TSAUTOP hydro dipping drying equipment has two types, drying ovens and different sizes of drying tunnels, you can choose the suitable one according to your hydro dipping business.
Anyway, TSAUTOP can provide you with a one-stop solution for hydro dipping, you can know more from our hydro dipping business guide.
W*D*H
1.5*1*2.2m
4.9*3.3*6.56ft |
1.3*0.8*1.6m
4.3*2.6*5.24ft |
(1) Automatic thermostat
(2) Temperature range:Room-150ºC
(3) Main power:AC380V
(4) Heating power:9kw
(5) Wall thickness:80mm
(6) Outside1.2mm cold rolling plate, inside 1.2mm Galvanized sheet
(7) The circulation system uses a motor to drive the wind impeller |
W*D*H
1.8*1*2.2m
5.9*3.3*7.2ft |
1.6*0.8*1.6m
5.2*2.6*5.24ft |
(1) Automatic thermostat
(2) Temperature range:Room-150ºC
(3) Main power:AC380V
(4) Heating power:12kw
(5) Wall thickness:80mm
(6) Outside1.2mm cold rolling plate,inside 1.2mm Galvanized sheet
(7) The circulation system uses a motor to drive the wind impeller |
Chapter 1: Pretreatment of Products Before Hydro Dip
Chapter 2: What kind of paint is used in hydro dipping?
Chapter 3: Which material must be sprayed base coating?
Chapter 4: How to prepare to hydro dip?
Chapter 5: How to distinguish the right side of hydrographic film touching the water?
Chapter 6: How to lay the hydro dipping film on the water?
Chapter 7: When to start to spay the activator?
Chapter 8: How many activators spray to the dip film?
Chapter 9: How does hydro dipping work?
Chapter 10: How long to change the water in the hydro dipping tank?
Chapter 11: How to wash after hydro printing?
Chapter 12: How to deal with the defective product by trimming?
Chapter 13: How to rework defective products?
Chapter 14: How to dry the dipped products after dipping and top coating?
Chapter 15: The dip painting method for top coating:
Chapter 16: The instructions on finish coat application
Chapter 17: How to properly use and maintain the spray gun?
Chapter 18: How to do Quality Control and Packing after finishing the paint dipping process?
Chapter 19: The reason and solutions for defects in the transfer printing process
TSAUTOP® hydro dipping tank is easy to install and operate. The electrical wire connection is simple. Each wire sticks a number, you connect the wire to the number. We supply detail manual book. We have different dimensions of hydrographic tanks, you can choose the suitable one according to your working items.
4) Have passed the SGS authentication by Alibaba. (Please kindly refer to the attachment with many thanks).
5) There are economic series and high-level series of wraps in our factory to meet different customers' demands.
6) Customized service: the outer cartons and backing paper could be made with your customized designs.
7) No warehouse storage risk for you. Our warehouse is your warehouse.
8) Besides the products, we also have a professional sales team to give you good marketing suggestions.
1. What is water transfer printing?
Water transfer printing, often referred to as hydrographic, immersion printing, camouflage dipping, hydro imaging, and cubic printing, is a method of surface decoration in which complex graphics, such as wood grain, carbon fiber, camouflage, geometric patterns, etc., are applied to the surface of a three-dimensional product. Large-scale all-terrain vehicles, automobile dashboards, little items like bicycle helmets, and other automotive trim are all decorated with the use of the water transfer printing method. In addition to plastic, fiberglass, wood, ceramic, and metal, films can be applied to all kinds of substrates.
2. How long-lasting is water transfer printing?
We prefer to let our goods do the talking. Automobile, camera, and electronic manufacturers, who demand the highest standards of quality and longevity, are some of our biggest clients. Many of the components we make live most of their lives in the sunlight. We utilize an automotive-grade clear coat that is made to resist the elements and the test of time.
3. How challenging is it to learn the procedure?
An extra two to three weeks are typically needed to fine-tune the production line after the initial 24-hour training session.
4. What kind of equipment is needed to print films using immersion?
To complete the process of water transfer printing, tanks (manual or automatic), a washing station, an oven, and a spray booth are needed.
5. Is a wash station necessary for hydro dipping?
Yes, washing machines are required to remove the subject after PVA film has been used to transfer the decorated portion.
6. Do painted pieces need to be dried in an oven?
Yes, it is best to dry by oven because, by nature, dust would cover the subject as it dries. The oven temperature for plastic should be between 50 and 70 degrees.
7. What size sprayer would you suggest using for hydrographics?
For activators, a high-quality, precisely calibrated spray gun is required to operate with it. We advise 0.8-1.3mm, not over 1.3mm.
8. Do you operate as a manufacturer or a trading firm?
We are a WTP manufacturer in China with 20 years of expertise.
9. May I purchase all of my water transfer printing supplies from you?
Yes, we can manufacture and provide films, activators, base primers, clear coats, other chemicals, WTP machines, hydro-dipping processes, technology, and training.
10. May I give you dipping products so that you may assist me in completing my water transfer printing?
Yes, our business can transfer various goods thanks to its two water transfer printing production facilities in Zhejiang Province. Send your items to our factory from your Chinese supplier, and we will handle all processing.
){kind=link}
){kind=link}