Product Description
TSAUTOP Semi-Automatic HYDRO DIPPING EQUIPMENT DRYING OVEN Dry Oven Machine
We are making these with 4" high-density mineral wool panels surrounded with 20ga galvanized steel to provide the best insulation possible with 3.15" walls (this is not household insulation often used in lower-quality ovens). This model oven is powered by 220v, 60A single phase power, and the control box will need its own 110v power circuit. It has three 4000-watt 48" u-bend industrial heating elements made to aid in the circulation of heat providing more consistent temperatures throughout the oven. Our industrial oven elements will also have a longer life than ovens using elements from a household oven. All of our ovens have a 14ga galvanized floor to provide a smooth transition when using a rolling rack in your oven.
Our oven control box is designed to make it easier on the end user by using the auto-tuning feature. With this feature, all you have to do is hook up the power and turn the oven on and it will automatically set up the PID controller to provide the fastest warm-up times while keeping the temperature closer to your setting. We also use solid-state relays in all of our control boxes to eliminate moving parts that may fail, while also keeping noise down from the operation of larger contact blocks.
(1)Automatic thermostat
(2)Temperature range: Room-150ºC
(3)Main power: AC380V
(4)Heating power:12kw
(5)Wall thickness:80mm
(6)outside1.2mm cold rolling plate, inside 1.2mm Galvanized sheet
(7)The circulation system uses a motor to drive the wind impeller
Product Parameters
| Item NO. |
TSDOM1200 |
TSDOM1500 |
TSDOM1800 |
| Machine Size |
120*100*220(cm) |
150*100*220(cm) |
180*100*220(cm) |
| 4.27*2.62*6.56(ft) |
4.9*3.28*6.56(ft) |
4.59*8.53*4.59(ft) |
| Drying Area Size |
100*80*160(cm) |
130*80*160(cm) |
160*80*160(cm) |
| 3.28 * 1.97 * 5.58(ft) |
4.26 * 2.62 * 5.58(ft) |
5.9 * 7.87 * 5.58(ft) |
| Machine Material |
20ga galvanized steel |
| Main power |
380V, 3 phases, 50 HZ, 12kW |
380V, 3 phases 50 HZ, 18W |
| Temperature Range |
Room-200ºC |
| Wall Thickness |
80mm |
80mm |
The water transfer printing process is extensively used to decorate items that range from entire all-terrain vehicles and car dashboards to small items like bike helmets or other automotive trim. Films can be applied to all types of substrates including plastic, fiberglass, wood, ceramics, and metal. For the most part, if the item can be dipped in water and can be painted using traditional techniques then the hydro dipping process can be used.
In the process, the substrate piece to be printed first goes through the entire painting process: surface preparation, priming, Dipping, Washing(Rinsing), drying, and top coating(clear or matte). After painting but before top coating, the part is ready to be processed. A (polyvinyl alcohol) PVA hydrographic film, which has been gravure-printed with the graphic image to be transferred, is carefully placed on the water's surface in the hydro dipping tank. The clear film is water-soluble and dissolves after spraying the hydro dip activator. Once hydro dipping is begun, the surface tension of the water will allow the pattern to curve around any shape. Any remaining residue is then rinsed off thoroughly by the rinsing station. The ink has already adhered and will not wash off. It is then allowed to dry.
){kind=link}
){kind=link}